Overview

Drone Light Show Edition of DroneBridge for ESP32

This section of the documentation is for the Drone LightShow Edition of DroneBridge for ESP32 only!

See the section above for documentation regarding the public general-purpose release of DroneBridge for ESP32.

The Drone Light Show Edition (DLSE) has the following improvements over the general-purpose release of DroneBridge for ESP32:

  • Support for Lightbrush.io and its flight controller firmware

    • Auto-detection of the UAV by Skybrush Live

    • Support for remote sleep & wakeup modes

    • Various MAVLink- and Drone Show-related configuration parameters in the firmware

    • Open-Source Commercial Support Suite to help with flashing, the setup and configuration of a drone fleet

    • Documentation specifically targeted for skybrush & drone show setup

  • Over-The-Air (OTA) Updates of the ESP32 firmware

  • Improved safety: In code safety checks with drone shows in mind & reduced code size/complexity

  • Reduced the load on the network by each ESP32 by disabling unnecessary services

  • First to support the ESP32-C5 with dual-band Wi-Fi capability

Last updated